Non-toxic nanolithography using pure water

 
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> MEMS
View previous topic :: View next topic  
Author Message
nanoorg
Site Admin


Joined: 16 Mar 2004
Posts: 1392

PostPosted: Thu Oct 19, 2006 11:42 am    Post subject: Non-toxic nanolithography using pure water Reply with quote

Non-toxic nanolithography using pure water


Conventionally, the fabrication of thin film nanostructures is primarily done by using selective etching or templating growth on a prepatterned resist and then performing lift-off. The solvents used in developing resist are typically toxic and add to the cost of lithographic processing. Recently, many environmentally friendly lithographic processes have been designed using either a water-based solution or supercritical carbon dioxide to develop the resist. A novel pure water developable spin-coatable lanthanum strontium manganese oxide (LSMO) resist has been developed by scientists in Taiwan. The use of pure water instead of organic or alkaline solvents would undoubtedly be not only environmentally desirable but also could greatly simplify the imaging process.

During semiconductor or thin film production, a conventional resist serves as passive masking function which is removed after the circuit is generated. The solvents used in developing resist are typically volatile and toxic, contributing to health hazards and environmental pollution.

Dr. Wei-Fang Su , professor in the Department of Materials Science and Engineering at Taiwan National University, explained the novel water-based process: "We have developed a direct writing resist from the LSMO using its precursor solution. This solution is functioned as a resist via an auto ignition mechanism during electron beam exposure, and the patterned LSMO film can be developed using nontoxic and environmental friendly pure water."

Su and her colleagues report their findings in a recent paper, titled "Nanolithography made from water-based spin-coatable LSMO resist", published in the August 14, 2006 online edition of Nanotechnology .

Either positive or negative patterns can be easily produced from the water-based magnetic resist material by varying the electron doses. The resist material consists of the oxide precursors of La, Sr, Mn, and a phase formation promoter. The phase formation promoter is polymer that assists the formation of the perovskite crystalline structure of lanthanum strontium manganese oxide.

"Pure water is used to develop the resist" says Su. "Various nanoscale patterns can be formed from the material using an electron beam. An external magnetic field on the spin-coatable LSMO resist samples shows colossal and negative magnetoresistance effects ( CMR ). The material also exhibits high refractive index ( ∼ 2.38 ). These properties are useful for the direct fabrication of waveguide, photonic crystal, optoelectronic devices, optomagnetic devices and spintronics."

Continuing her research on this material, Su says that the near term goal is to study the interactions between the light and magnetic waves from patterned arrays fabricated from this material. By modulating the magnetic wave or light wave the researchers hope to fabricate novel devices.



Source: http://www.nanowerk.com/


This story was first posted on 22nd August 2006.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> MEMS All times are GMT
Page 1 of 1
 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group