Bioinspired polymer-inorganic hybrid materials

 
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Nanobiomed
View previous topic :: View next topic  
Author Message
nanoorg
Site Admin


Joined: 16 Mar 2004
Posts: 1392

PostPosted: Tue Dec 05, 2006 1:57 pm    Post subject: Bioinspired polymer-inorganic hybrid materials Reply with quote

Bioinspired polymer-inorganic hybrid materials
by Michael Berger


The use of design concepts adapted from nature is a promising new route to the development of advanced materials, with biominerals providing an ample source of examples. For instance, Nature’s ability to manipulate poor engineering materials such as calcium carbonate to produce skeletal materials with considerable fracture resistance is an ideal inspiration for this approach. Researchers in the UK now report a simple and general approach to single crystal growth, employing structured films of generic polymers to direct the growth of single crystals. By using straightforward patterning techniques they are able to access a large variety of patterns with a continuous range of length scales from the macroscopic to the nanometer level.

While a number of techniques have been used previously to pattern the gross morphology of calcite single crystals, including growth in lithographically created moulds, templates derived from biominerals or on colloidal particle monolayers, the method described by the scientists in the UK is significantly more flexible and general.

Dr. Sabine Ludwigs, who is currently holding a postdoc position in the Thin Films and Interfaces Group at the University of Cambridge's Cavendish Laboratory, explained these recent findings to Nanowerk: "We developed a straightforward route to patterning crystal growth. Structured polymer templates are employed as substrates to support calcite crystal growth, resulting in translation of the polymer film pattern into the crystal nucleation face."

The researchers demonstrated that these structured polymer films provide a versatile new route to patterning crystal growth and generating inorganic/organic hybrid materials. Accessing a wide variety of patterning techniques (top-down and bottom-up approaches) and matrix materials, use of structured films of generic polymers to direct the crystal growth provides a procedure that incorporates the organic phase into a growing single crystal and spans a wide range of pattern sizes and periodicities.

Ludwigs and co-workers report their results which resulted from a collaboration between Cambridge and Dr. Meldrum’s group in the University of Bristol's School of Chemistry, report their research in a recent paper in Advanced Materials with the title: "Bioinspired Polymer–Inorganic Hybrid Materials".

Ludwigs points out that their way of patterning single crystals with polymer template is quite generic and can therefore easily be expanded to other materials. Since standard lithographic methods were employed, this allows the use of any organic material that can be lithographically patterned as a template for crystal growth.

In the process employed by the UK scientists, polymer films selectively lift off the supporting substrate and get fully embedded into the inorganic matrix during crystal growth thereby forming a synthetic polymer/inorganic composite material. Using a nanoporous polymer template the scientists can produce a synthetic polymer/inorganic composite material that closely resembles abalone nacre in structure.

"Crystallisation initiated on a nanostructured polymer film not only provides easy access to unprecedented length scales (as small as 10 nm), but for the first time offers an organic film which is structurally very similar to an organic matrix directly involved in biomineralization, the organic sheets separating the aragonite tablets in abalone nacre (a.k.a. mother of pearl) " Ludwigs explains.

Since the template is transferred onto a growing crystal by the growth process itself, it should be possible to iterate this process and thereby generate three-dimensional hybrid materials with sub-micrometer internal dimensions.

"Our methodology is also quite general and could be applied to many other inorganic crystals produced under ambient conditions" Ludwigs concludes.





Source: http://www.nanowerk.com/spotlight/spotid=820.php




This story was posted on 12th September 2006.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Nanobiomed All times are GMT
Page 1 of 1
 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group