Carbon Nanomaterials Used as Catalysts in Tiny Fuel Cells

 
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Nanoenergy
View previous topic :: View next topic  
Author Message
grantnano
Site Admin


Joined: 03 Oct 2005
Posts: 432

PostPosted: Mon Oct 10, 2005 3:31 pm    Post subject: Carbon Nanomaterials Used as Catalysts in Tiny Fuel Cells Reply with quote

DMFCs will have to reach 100 mW/cm2 to avoid an output density shortfall and to meet the requirements of power-hungry devices such as notebook computers, handheld data collection devices and military equipment.

A DMFC needs a pump and pipes to carry out electrochemical processes. This creates space constraints and it becomes difficult to mount the system on a miniature scale.

A very effective alternative to DFMC is the direct formic acid fuel cell (DFAFC) technology, with five to six times higher power densities. Such high densities aid the miniaturisation of the fuel cells, especially in portable devices. They also improve the efficiency of the fuel cell without compromising on the net output of electricity.

“The use of formic acid as a fuel offers advantages such as less fuel cross-over, use of higher fuel concentrations (80 per cent by weight) at the anode side, good anode kinetics at room temperatures and high power densities,” says Frost & Sullivan Research Analyst Viswanathan Krishnan.

Researchers from Kongkuin University, Japan have worked and improved upon direct borohydride fuel cells (DBFCs) to eliminate or reduce glitches such as borohydride crossover by using a Nafion membrane electrolyte-based fuel cell. They claim to have achieved a power density of 160mW/cm2 at an operating temperature of 70 degree centigrade.

Taking this further, researchers at the Solid State and Structural Chemistry Unit of Indian Institute of Science, India have proposed a DBFC using hydrogen peroxide as the oxidant. The research team reports power density of 350mW/cm2 at a cell voltage of 1.2 V.

To generate this electricity, it is important to have catalysts to speed up the electrochemical process. Currently, only platinum and ruthenium are used in the fuel cells as catalysts. Scientists have been working on finding non-noble substitutes that are more cost-efficient for fuel cell technology.

“Scientists are considering nanomaterials as catalysts for fuel cells consisting of carbon-supported metal particles,” notes Krishnan. “The nanomaterial structure increases the surface-to-volume ratio of expensive noble metals and plays a vital role in reducing the overall cost of the fuel cell.”

At the University of Oxford, researchers have suggested using an enzyme catalyst within a fuel cell. Instead of the regular platinum-coated anode, they have used hydrogenase-coated electrode to catalyse efficient oxidation of hydrogen. The cathode contains the fungal enzyme laccase, which catalyses reduction of oxygen to water.

Microfuel cells have been taking giant strides in technology development. Newer designs that give them greater power and efficiency have firmly placed them on the path to commercialisation.

Source: Physorg.com.
URL: http://www.physorg.com/news6871.html
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Nanoenergy All times are GMT
Page 1 of 1
 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group