Carbon nanotubes could make t-shirts bullet proof

Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Nanomaterial
View previous topic :: View next topic  
Author Message
Site Admin

Joined: 16 Mar 2004
Posts: 1392

PostPosted: Tue Mar 27, 2007 9:14 am    Post subject: Carbon nanotubes could make t-shirts bullet proof Reply with quote

A new study by researchers in Australia explores the energy absorption capacity of a single-walled carbon nanotube under a ballistic impact. The result offers a useful guideline for using CNTs as a reinforcing phase of materials to make devices to prevent from ballistic penetration or high speed impact.

Professor Liangchi Zhang from the School of Aerospace, Mechanical and Mechatronic Engineering at the University of Sydney explained the new research: " Especially in making bullet-proof vests, shields, and explosion proof blankets, the best protective material will have a high level of elastic storage energy that will cause the projectile to bounce off or be deflected, i.e., the objective is to reduce the effects of 'blunt trauma' on the wearer after being struck by a bullet. We therefore tried to understand the impact behavior of CNTs."

Zhang published his recent findings, titled "Energy absorption capacity of carbon nanotubes under ballistic impact", in the September 18, 2006 issue of Applied Physics Letters.

Zhang's study analyzes the impact of a bullet on nanotubes of different radii in two extreme cases. For a nanotube with one end fixed, the maximum nanotube enduring bullet speed increases and the energy absorption efficiency decreases with the increase in relative heights at which the bullet strikes; these values are independent of the nanotube radii when the bullet hits at a particular relative height. For a nanotube with both ends fixed, the energy absorption efficiency reaches minimum when the bullet strikes around a relative height of 0.5.

"Specifically, we investigated the relationship between the nanotube radius, the relative position at which the bullet strikes, the bullet speed, and the energy absorbed by the nanotube for a particular bullet size and shape" says Zhang.

A piece of diamond having 1903 atoms was used as a bullet with its speed varying from 100 to 1500 m/s. The bullet dimension was selected such that the width is larger than the width of the biggest nanotube after flattening. The bullet was released from a target about 15 from the center axis of the nanotube and moved at a constant speed in the horizontal direction i.e., perpendicular to the nanotube axis, as shown in the graphic above. The nanotube performance was examined for bullet released with various speeds at various positions using the classical molecular dynamics method.


This story was first posted on 23rd November 2006.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Nanomaterial All times are GMT
Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2002 phpBB Group