European Union choose nanotechnology for tyre recycling

 
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Europe
View previous topic :: View next topic  
Author Message
nanoorg
Site Admin


Joined: 16 Mar 2004
Posts: 1392

PostPosted: Fri Dec 21, 2007 4:57 pm    Post subject: European Union choose nanotechnology for tyre recycling Reply with quote

A new nanotechnology application would allow the automotive industry to meet EU directives for recycling tyres and would also reduce 40,000 tonnes of carbon dioxide greenhouse gas emissions per facility.

At the European Tyre Recycling Association (ETRA) Conference 2007 in Brussels, Belgium it was estimated that the equivalent of 300,000,000 or more tyres reach their end-of-life each year in the 27 member states of the European Union. It also estimated that similar amounts are found in North America, Latin America, Asia and the Middle East and that the global contamination total is probably over 1,000,000,000 passenger car tyre equivalents per year.

For many of the past years these environmental hazardous accumulations were stockpiled or illegally dumped after receiving collection fees or government subsidies. As of 2006 the European Directives have banned scrap tyres, shredded tyres and tyre residues from being landfilled or stockpiled.

However, ETRA reports that only 33% of these End-Of-Life tyres are being recycled into recovered materials. Due to the abundant market pressures the only undesired alternative was to burn the tyres.

Pyrolysis of scrap tyres has not been commercially successful mainly because of the poor quality of the heterogeneous nature of the carbon rich pyrolysed by-product. In order to look for practical methods to post-treat the pyro-carbon into market products the European Union Cooperative Research (CRAFT) Recycle tyre contract GIST-CT-2002-50281 was initiated. After researching worldwide, the EU scientific team selected the products produced by CBp Carbon Industries Inc. as the “best-available- technology” to successfully complete their EU Recycle tyre project objectives.

The test results showed that the crude pyro-carbon was refined and upgraded to functional grades of reinforcing black fillers, CBpEX, CBpES and CBpEU which can be substituted and blended with N-500, N-600, N-700 and N-900 series of standard commercial carbon black grades. The new technology for recycling tyres is the first fully integrated approach of thermal and mineral technologies that is both environmentally and economically viable.

The technology allows for the economic upgrading of the raw carbonaceous char, one of the by-products of the heating process, into a commercial substitute for carbon black, a main commodity for the rubber and plastics industries and demonstrates clean operations that cause no detrimental environmental impact.

The complete ETRA 2007 presentation, “New Reinforcing Black and Mineral Fillers Derived from Scrap tyres” can be seen on the CBp Carbon Industries Inc. web site home page: www.cbpcarbon.com








Sources: Auro Industry & Nanowerk

http://www.nanowerk.com/news/newsid=1833.php



Story posted: 26th April 2007
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Europe All times are GMT
Page 1 of 1
 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group