Flat-panel Displays Show Promise

 
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Nano Computing
View previous topic :: View next topic  
Author Message
nanoorg
Site Admin


Joined: 16 Mar 2004
Posts: 1392

PostPosted: Fri Feb 27, 2009 12:13 pm    Post subject: Flat-panel Displays Show Promise Reply with quote

Flat-panel computer displays could be manufactured quickly and cheaply using novel inkjet printing equipment demonstrated by Japanese scientists.

"The present work demonstrates the feasibility of employing inkjet technology… for electronic device applications," the University of Tokyo team write in Proceedings of the National Academy of Sciences.

Plastic power

Researchers have been exploring the use of printing for building electronic devices for a number of decades.

"Printed electronics could be much bigger than silicon as they have relevance to other applications such as lighting and photovoltaics," Dr Peter Harrop of research firm IDTechEx told BBC News.

The technique holds particular promise for so-called "organic" electronics, also known as plastic electronics.

These rugged devices are made from organic polymers - already used to make bin bags and solar panels, for example.

Making circuits this way would be cheaper and easier than producing conventional silicon devices which must be processed at high temperatures in costly clean room facilities.

Organic polymers are already manufactured by some firms.

For example, in 2004 electronics giant Philips showed off a concept flexible display, while other companies such as Cambridge Display Technology use the approach to make organic light-emitting diodes (LEDs).

In 2007, UK firm Plastic Logic announced that it would build a plant in Germany to produce flexible organic "control circuits" for use in "electronic paper" displays using the technology.

However, printing is still too crude for building high-performance devices such as thin film transistors (TFTs) - used in flat panel displays - which require circuitry just two microns (millionths of a metre) across.

Typically, a standard printer will produce features 50 microns across.

As a result, demonstrations of organic TFT screens have often relied on cumbersome and expensive masks - or stencils - to lay down circuits.

Slow worker

The new work from the University of Tokyo offers a new and more flexible approach.

"This technique can be applied for patterning high-purity electrically functional materials without preparing original patterning masks," the researchers write.

They were able to create finer details by applying a high voltage to the print head, causing drops in the inkjet to explode into one micron droplets.

Using ink made of silver nanoparticles held in a solvent, the researchers printed continuous lines two microns wide and components just one micron across.

Although these are large by current microprocessor standards - which can have features measured in nanometres (billionths of a metre) - the researchers believe it is good enough for use in TFT screens.

However, they acknowledge that the current prototype is too slow for commercial applications.

As a result, they suggest that their technique should only be used to pattern precise and critical features of circuitry, allowing lower resolution printers to lay down the rest of the pattern.

Source: http://news.bbc.co.uk/1/hi/technology/7312389.stm
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Institute of Nanotechnology Forum Index -> Nano Computing All times are GMT
Page 1 of 1
 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group