Joined: 03 Oct 2005
|Posted: Tue Feb 28, 2006 2:07 pm Post subject: New, Low-Cost Method to Synthesize Inorganic Nanomaterials
|Researchers at Jilin University in China Develop a Simple, Large-Scale and Low-Cost Method to Synthesize Inorganic Fullerene-like Nanomaterials
As a lubricant, some inorganic fullerene-like nanomaterials (IFs) have shown to be more effective than oil-based liquids with solid lubricant additives. This means less wear and tear on machinery than users get with more traditional lubricants. Many IFs are currently being synthesized by different methods as pure materials. It has remained a challenge, though, to develop more economical methods to produce these IFs in sufficient quantities at acceptable prices for industrial use..
Following the discovery of carbon fullerenes and nanotubes, the first closed-cage non-carbon fullerene-like nanoparticles and nanotubes of WS2 ( tungsten disulphide ) were reported by Tenne et. al. in 1992. These nanomaterials with new structures were generally given the name of inorganic fullerene-like materials.
Among IFs, transition metal sulfides ( IF-MS2 ) are of greater interest to researchers due to their physical and chemical properties. Besides being superior solid lubricants, IF-MS2 nanomaterials have shown promising applications as electron devices, catalysts, electrochemical hydrogen storage bodies, super shock absorbers, photosensitive films and ultrastrong tips for scanning microscopy. Because of their interesting properties and promising applications, intense interest has been shown in developing new IFs and ways of synthesizing them.
Professor Haibin Yang who, together with Dr. Shikai Liu, was the main author of the below-mentioned report, sees a bright commercial future for IF-MS2 nanoparticles such as IF-WS2, if the fabrication process is made more economical.
As Professor Yang explained to Nanowerk: "We found a simple route for the synthesis of IF-WS2 nanoparticles by the reaction of sulfur ( S ) powder and tungsten trioxide ( WO3 ) nanoparticles in a hydrogen atmosphere at a heating temperature of 500-650°C. This reaction process is easy to control. It allows us to produce IF-WS2 in high purity and large scale at low cost. These features are indispensable for future industrial applications."
"In particular" Dr. Liu added, "we discovered that the outputs could be easily increased with almost no decrease in quality simply by changing the amount of composite powders, WO3 and S, and the content of hydrogen."
The three main parts of the relatively uncomplicated process are synthesis of the WO3 nanoparticles, preparation of the composite powders and synthesis of IF-WS2 in a hydrogen atmosphere. The method also does not require an expensive and timeconsuming purification process, further adding to the production efficiencies. The resulting IF-WS2 nanoparticles are of a closed hollow cage structure with an average size of about 50 nm.
A report on these findings, titled "Synthesis of inorganic fullerene-like WS2 nanoparticles and their lubricating performance" appeared in the Feb. 16, 2006 online edition of Nanotechnology.
By Michael Berger, Copyright 2006 Nanowerk LLC.
Source: Nanowerk LLC.
This story was posted on 27 February 2006.