Innovative imprinting technique produces highly ordered alumina films
An innovative imprinting technique produces highly ordered alumina films with nanometer-sized pores on silicon wafers
Nanoporous anodic alumina films are versatile materials that can be used as templates in the fabrication of miniscule multifunctional objects for electronics and energy storage, such as nanotubes and nanowires. Unfortunately, the tedious small-scale techniques required to manufacture these films limits their implementation in industrial processes.
A team led by Tanu Kustandi from the A*STAR Institute of Materials Research and Engineering in Singapore has now developed a microfabrication procedure that is compatible with those used in the semiconductor industry to generate highly ordered nanoporous alumina films on large silicon wafers1.
“Conventionally, films are prepared via a mechanical indentation approach, in which a master stamp is pressed onto an aluminum surface at very high pressure,” explains Kustandi. However, this approach tends to break the underlying substrate that supports the aluminum films.
To avoid hard-stamping, Kustandi’s team developed a ‘soft’ approach by combining a lithography process called step-and-flash imprint lithography (SFIL) with a wet-etching technique to pre-pattern the metal. First, they coated the silicon wafer with aluminum and an ‘organic planarization layer’ and sprayed the surface with an imprint resist—an etch-resistant low-viscosity material that polymerizes under ultraviolet light. Next, they positioned a quartz template patterned with nanometer-sized pillars on the surface, allowing the resist to contact and fill the template, then illuminated the assembly with ultraviolet light to create an inverse replica of the template. By moving the template toward an unpolymerized area and repeating the patterning process, the entire wafer was imprinted with nanometer-sized features.
After the researchers cleaned the patterned surface of residual and planarization layers, they transferred the pattern to the aluminum layer using an acid mixture as an etchant. Finally, they removed the polymer resist through ultraviolet–ozone treatment and oxidized the metal using an electrochemical process, known as anodization, to form the nanoporous alumina film.
Kustandi and his team generated a range of nanopore shapes, including squares and hexagons, by varying the structural configuration of the pillars. They discovered that SFIL patterning produced films with uniform pore sizes, shapes and arrangement, whereas non-patterned alumina appeared amorphous (Fig. 1). They also found that, unlike conventional techniques, the mild patterning conditions produced the nanometer-scale features with high repeatability and increased the longevity of the quartz template.
The researchers are currently investigating potential device applications for the nanoporous alumina films. “We are now utilizing the alumina template in the optoelectronics field to obtain high-efficiency gallium nitride-based light-emitting diodes,” says Kustandi.
Source: A*Star Research /...
Previous Story: Increased quality control of production lines
Next Story: Fighting infection with revolutionary medical dressing
The Institute of Nanotechnology puts significant effort into ensuring that the information provided on its news pages is accurate and up-to-date. However, we cannot guarantee absolute accuracy. Consequently, the Institute of Nanotechnology disclaims any and all responsibility for inaccuracy, omission or any kind of deficiency in relation to the news items and articles hosted herein.
- 15 April 2014Targeting cancer with a triple threat
- 01 April 2014 Nano-paper filter can remove viruses
- 19 March 2014EU NanoSafety Cluster - Key Global NanoSafety Database Survey
- 04 March 2014NanoCelluComp presents final results at JEC Europe 2014
- 17 February 2014Researchers Hijack Cancer Migration Mechanism to “Move” Brain Tumours
- View All